SKF TIH 100M/230V Induction Heater
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
Technical Details
| Dimensions | |
| Dimensions (W x L x H) |
230 x 570 x 350 mm |
| Operating area height | 205 mm |
| Operating area width | 155 mm |
| Workpiece weight (max) | 120 kg |
| Properties | |
| Bearing support arms |
Yes, foldable |
| Coil diameter |
110 mm |
| Colour |
Grey Black |
| Cooling fan |
No |
| Demagnetisation after heating (according SKF norms) |
< 2 A/cm |
| Error guiding codes |
Yes |
| Heating temperature (max) |
250 °C |
| Heating temperature control |
0 to 250 °C |
| Heating temperature steps |
1 °C |
| Heating time control |
0.1 - 60 minutes min |
| Heating time steps |
0.1 min |
| Housing material |
Steel Glass fibre filled polyamide |
| Main yoke type |
3 |
| Power consumption (max) |
3.6 kVA |
| Power setting |
50% 100% |
| Remote control panel (wired) |
Yes, with LED display |
|
Temperature measurement |
Magnetic probe K-type |
| Thermal overload protection |
Yes |
| Thermometer mode |
Yes |
| Time mode |
Yes |
| Voltage |
220.0 – 240.0V |
| Voltage frequency |
50.0 – 60.0 Hz |
| Workpiece bore diameter |
20 to 400 mm |
| Yoke storage |
Yes, internal |
| Heating performance example (bearing, weight, temperature, time) |
23156 CC/W33, 97 kg, 110 °C, 20 min |
| Product net weight | 40 kg |
PRODUCT DESCRIPTION
The SKF TIH 100M is a medium sized induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater is supplied with a swivel yoke and two optional yokes for smaller bearings. The TIH 100M can heat small bearings with a bore diameter of just 20 mm and larger bearings with a maximum weight of 120 kg.
Supplied with a swivel yoke and two smaller yokes, located in an integrated storage compartment
Easy and safe to use with automatic temperature control or time controlled heating
Automatic demagnetization reduces risk of bearing contamination
Suitable for non-bearing applications for workpieces weighing up to 60 kg
Automatic temperature hold function to keep the bearing hot after completion of the heating cycle