SKF Small induction heater, TIH 030M/230V
+ 18% GST
BEST OFFERS FOR YOU!
Enjoy 2% off on your first purchase! Copy the coupon code and apply it at checkout.
Technical Details
|
Designation |
TIH 030M/230V |
|
Colour |
Grey Black |
| Heating temperature control |
0.0 – 250.0°C |
|
Heating time control |
0.1 – 60.0min |
| Heating time steps |
0.1 min |
| Power consumption (max) |
2 kVA |
| Power setting |
50% 100% |
| Remote control panel (wired) |
Yes, with LED display |
| Thermometer mode | Yes |
| Time mode | Yes |
| Voltage frequency |
50.0 – 60.0Hz |
| Heating temperature (max) |
250 °C |
| Workpiece bore diameter |
20.0 – 300.0 mm |
| Coil diameter | 95 mm |
| Voltage |
220.0 – 240.0V |
| Heating temperature steps | 1 °C |
| Temperature measurement |
Magnetic probe K-type |
| Demagnetisation after heating (according SKF norms) | < 2 A/cm |
| Error guiding codes | Yes |
| Thermal overload protection | Yes |
| Bearing support arms | Yes, foldable |
| Yoke storage | Yes, internal |
| Main yoke type | Loose yoke |
| Cooling fan | No |
| Housing material |
Steel Glass fibre filled polyamide |
| Dimensions |
|
| Workpiece weight (max) | 40 kg |
| Operating area height | 135 mm |
| Operating area width | 100 mm |
| Dimensions (W x L x H) | 195 x 450 x 210 mm |
| Heating performance example (bearing, weight, temperature, time) |
23136 CC/W33, 28 kg, 110 °C, 20 min |
PRODUCT DESCRIPTIONS
Small induction heater (230V version)
The SKF TIH 030M is a small induction heater and is designed for the hot mounting of bearings. This compact heater is ideal for use on workbenches, yet it can be easily carried for on-site applications. Supplied with three yokes and foldable support arms, the heater is capable of heating bearings with a bore diameters of 20 mm or more and with a maximum weight of 40 kg.
Easy and safe to use with automatic temperature control or time controlled heating
Automatic demagnetization reduces risk of bearing contamination
Suitable for non-bearing applications for workpieces weighing up to 20 kg
Automatic temperature hold function to keep the bearing hot after completion of the heating cycle
