Home » All Products » MAKITA XGT 40V max Cordless Impact Driver TD003GZ
MAKITA

MAKITA XGT 40V max Cordless Impact Driver TD003GZ

Enquiry Now
SKU: TD003GZ
Rs. 23,599.00
Sale Rs. 31,830.00 Rs. 23,599.00
+ 18% GST

BEST OFFERS FOR YOU!

Enjoy 2% off on your first purchase! Copy the coupon code and apply it at checkout.

TECHNICAL DESCRIPTION

Capacity:
  Machine screw: M4 – M8 (5/32 – 5/16″)

High strength bolt: M5 – M14 (3/16 – 9/16″)
Steel: 22 mm (7/8″)
Wood (Self-feed bit): N/A mm (N/A”)
Standard bolt: M5 – M16 (3/16 – 5/8″)
Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″)
Wood (Auger bit): 24 mm (15/16″)
Masonry drill diameter:
 N/A mm (N/A”)
Hole saw diameter:
 38 mm (1-1/2″)
Shank/Drive:
 Hex Shank 6.35 mm (1/4″)
No Load Speed (RPM):
 Max / Hard / Med. / Soft / T mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 2,400
Impacts per minute (IPM):
 Max / Hard / Med. / Soft / T mode: 0 – 4,100 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / N/A
Fastening torque:
 Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)
Max fastening torque:
 210 N·m (1,860 in.lbs.)
Max output:
 520 W
Vibration Level:
 Impact tightening of fasteners of the maximum capacity of the tool: 11.9 m/s²
Vibration K Factor:
 Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s²
Sound Pressure Level:
 95 dB(A)
Sound Power Level:
 106 dB(A)
Noise K Factor:
 3 dB(A)
Dimensions (L x W x H):

w/o Battery: 121 x 86 x 195 mm (4-3/4 x 3-3/8 x 7-5/8″)
w/ BL4040: 121 x 86 x 252 mm (4-3/4 x 3-3/8 x 9-7/8″)
w/ BL4080F: 121 x 86 x 293 mm (4-3/4 x 3-3/8 x 11-1/2″)
w/ BL4020 / BL4025: 121 x 86 x 245 mm (4-3/4 x 3-3/8 x 9-5/8″)
w/ BL4050F: 121 x 86 x 274 mm (4-3/4 x 3-3/8 x 10-3/4″)
Net weight:
 1.7 – 2.9 kg (3.7 – 6.4 lbs.)

PRODUCT DESCRIPTION

40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m Impact Driver

  • 40Vmax XGT BL Cordless T-Mode 210 N·m (1,860 in.lbs.) Impact Driver
  • Combination of sufficient fastening performance and high cost-competitiveness achieved by carefully selecting the functions
  • Aluminum hammer case + Black bumper
  • Simple impact power selection:
    ∙ 4 modes (Max/ Hard/ Medium/ Soft for bolt)
    ∙ 1 T-mode (for thin metal only)
  • Max fastening torque: 210 N·m
    • Despite increased cost-competitiveness, the max fastening torque is close to that of TD001G, the flagship model of our XGT Impact drivers
    • Extended overall length ensures sufficient performance of hammer, enabling to outperform TD001G in heavy-duty operation
  • Light mode
    • To turn on the light, set F/R change lever in the neutral position, then pull the switch trigger. To turn off the light, pull the switch trigger again
    • The light turns off automatically one hour after turned on
  • Excellent performance in continuous heavy-duty operation
    High power 40Vmax XGT Li-Ion battery reduces the current load on the controller, allowing for continuous heavy-duty operation
  • Constant speed control allows to operate the tool at the same speed as that at which you operate the tool on a full charged battery, even when the remaining battery capacity becomes low
  • One-touch bit installation
    • Smoother installation of the bit has been achieved by reducing the resistance against insertion of the bit
    • By increasing the load of sleeve holding spring, we have reduced the chance of unexpected falling off of the bit
  • Anti-bit wobbling structure
  • XPT (eXtreme Protection Technology)
  • BL motor
  • Soft grip
  • Belt clip
  • One LED job light each on both sides